4) You will need to have on hand fast tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
If you find that the water line repair leak is in the supply line you will need to replace it or simply tighten it. Start by turning the water supply off and then flushing the toilet to get rid of the excess water. Now use the towels to dry the area so that it is easier for you to fix the leak. Use a wrench to loosen the hexagonal nuts on the supply line at the main end as well as the one which goes to the flush tank. Now use the replacement supply line which you have and tighten the bolt at the supply end first. Now adjust the length that you will need for the pipe to reach the flush tank. Once you adjust the length use a knife to cut the extra length and then tighten the hexagonal bolt at the other end.
When trying to locate a plumber, be sure they have had proper training. There are three types of plumbers and they are classified by the amount of training they have. An apprentice plumber receives training through a local union. They follow an apprenticeship program for about three or four years. They learn through on-the-job training and some classroom structure. An apprentice plumber does get paid for on-the-job training.
Sales representatives must know beforehand that almost all the answers above need to be encouraging. Otherwise, there is a slim to none chance a sale is made. Besides cold call prospecting, so much of the typical sales rep's time is spent trying to make sales when a sales situation does not truly exist.
When the drain line stops up it is just a matter of calling an air conditioning contractor to come out and clear the drain line. While he is there he will add an algae preventative to the system to prevent future occurrences. Proper air conditioner maintenance is the key to preventing water line repair leaks.
For a newly installed icemaker, you will need up to 24 hours to let the machine function and cool down. A newly installed icemaker may not work until the ice mold temperature has dropped to about 15F - 16F degrees. If you have just added a water line to the refrigerator, it may take up to about an hour and a half for the machine to start working. Also, a newly installed water line may have air in the line. It can sometimes take a few ice making cycles to clear the line of air.
In short, the emergency plumber you hire should be from a reputable company. If you think that you can rely on him then you should look for another one. An emergency plumber should be skilled and should be able to deliver quality services to everyone.